Fully automatic Micro Vickers hardness tester
CAHVST-2ZXY with built-in Measuring Software
Brief Introduction:
The iqualitrol fully automatic micro hardness tester CAHVST-2ZXY is mainly used for measuring small and thin test pieces and brittle hardware.
CAHVST-2ZXY can be widely used in various metals (ferrous metals, non-ferrous metals, castings, alloy materials) by selecting various accessories or upgrading various structures. Etc.), metal structure, metal surface processing layer, electroplated layer, hardened layer (oxidation, various infiltration layers, coating), heat-treated test piece, carbonized test piece, quenched test piece, minute part of phase inclusion, glass, agate Testing of brittle and hard non-metallic materials such as artificial gemstones and ceramics.
CAHVST-2ZXY is especially suitable for measuring the hardness gradient profile of workpieces in large quantities and the hardness test of specified parts.
The automatic stage controlled by the built-in stepping motor has a variety of control modes through mouse click control, high positioning accuracy, good repeatability, fast moving speed and high work efficiency;
Technical Specifications:
| Micro hardness scale |
HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1, HV2 |
| monitor |
7” LCD monitor |
| Test force(gf) |
10, 25, 50, 100, 200, 300, 500, 1000, 2000 |
| Load control |
Automatic (load/hold/unload) |
| Test force retention time |
5～60 seconds |
| Test force selection |
External force selection knob, the test force is automatically displayed on the 7-inch LCD touch display |
| Objective magnification |
10×, 40× |
| Optical channel |
Double optical channel (eyepiece and CCD camera channel) |
| Optical system (dual optical channel, no need to switch) |
1. Automatic digital encoder;
2, total magnification (μm): 100 × (observation), 400 × (measurement);
3. Measurement range (μm): 200;
4, resolution (μm): 0.01
|
| Hardness measurement range |
(5-3000)HV |
| Data output (optional) |
Built-in printer, test data can also be saved to USB flash drive for storage analysis |
| Maximum height of the test piece |
90mm |
| Maximum width of test piece |
120mm,
indenter center to machine wall distance)
|
| voltage |
AC220V/50HZ |
| Weight |
40kg |
|
|
Fully automatic Micro Vickers hardness tester CAHVST-2ZXY with built-in Measuring Software Images
|
