Metallographic Specimen / Sample Cutting Machine Max Cut Diameter 50mm
Brief Introduction:
iCut-401Metallographic sample cutting machine is used for the first working procedure of metallographic sample preparation.
It adopts high speed rotating thin cutting disc to cut samples. In order not to burn the sample, it equips with cooling system.
Very easy to use and maintain and widely used in the metallographic laboratory for cutting various metal samples.
Technical Specifications:
| Cutting Section |
50 x 50mm |
| Cutting Wheel Size |
300 x 2 x 32mm |
| Rotation Speed |
2800rpm |
| Motor |
2.6KW, 380V/50Hz/3Ph |
| Dimension |
740 x 465 x 390mm |
| Weight |
70Kg |
Metallographic Specimen Cutter:
When cutting a specimen from a larger piece of material, care must be taken to ensure that it is representative of the features found in the larger sample, or that it contains all the information required to investigate a feature of interest.
One problem is that preparation of the specimen may change the microstructure of the material, for example through heating, chemical attack, or mechanical damage. The amount of damage depends on the method by which the specimen is cut and the material itself.
Cutting with abrasives may cause a high amount of damage, while the use of a low-speed diamond saw can lessen the problems. There are many different cutting methods, although some are used only for specific specimen types. iqualitrol provides the iCut-864 low speed diamond saw for cutting OM (optical microscope), SEM (scanning electron microscope), and even TEM (transmission electron microscope) specimen.
Product Tags:
|
|
2800rpm Metallographic Specimen / Sample Cutting Machine Max Cut Diameter 50mm Images
|
